I love doing mosaic projects and I have had several people ask me how to do them. So here it is . . . The Mosaic "How-To" Tutorial!! Make sure you have everything you need before you get started and, most importantly, have fun!
You will need:
- Your base project (whatever you plan to mosaic . . . a garden stepping stone, a rock, a planter, etc)
- Tiles (You can find precut squares and pre-cut designs online or at craft stores such as Hobby Lobby OR you can break your own ceramics)
- Tile nippers
- Tile Glue and Grout Sealer
- Grout (I prefer dry grout that you mix as you go)
- Sponge and/or sponge brush
- small old paintbrush
- large old or disposable bucket for mixing grout
My latest project was a mosaic bird bath. I used the large base of a terra cotta planter and a pre-cut hummingbird tile design.
STEP ONE:
Make sure you start with a clean area. Wipe any dust or debris off of the area you are planning to tile/grout or your glue will not stick well. If you are using a pre-cut design, lay it out in the desired area. If you are doing a free-hand design, I suggest drawing your design in pencil on your project. I have also used traced designs on tracing paper.
STEP TWO:
Once you have your basic design layed out, start adding tiles around the main piece. I never glue anything down until I have the tiles arranged exactly how I want them! Depending on your project, you will need to cut the tiles into various shapes and sizes so that everything fits appropriately. This is where the tile nippers are needed! I have tried several types of tile cutters, but these are the best! (Be very careful, tile has been know to fly during the cutting process. Wear protective eye wear if desired).
You can lay pieces in an ordered or random pattern.
Continue laying out tiles until your project area is filled in.
STEP THREE:
Glue tiles to project! I have found it is easiest to squeeze some glue into a disposable cup and paint the glue on with an old small paintbrush. Very carefully lift one tile at a time and replace. I usually start with the center or the main design. You may want to use tweezers for any tiny pieces.
Once the tiles are all glued, let your project sit for 6-8 hours or even overnight.
(I find this to be the hardest part of the whole project!!)
STEP FOUR:
You are ready to grout! You can buy premixed grout or you can buy powdered grout. I prefer the powdered grout that is specifically for mosaic projects. Mix the grout according to directions in an old bucket (make sure you add a little water at a time). You want the mixed grout to be thick & smooth. You can also add color to the grout at this point. You can purchase powdered grout dye or I have even added a small amount of latex paint.
Press grout into all the grooves and in-between tiles. Make sure you cover the surface well.
Once you have grouted the entire surface, let your project sit for about 10 minutes. This is a good time to wash out your bucket with a garden hose. Don't wash extra grout down your kitchen sink!!
Start wiping the area with a clean sponge. Slowly wipe off the excess and smooth out the grout around the tiles. I like to have a small bucket of water close by to rinse out the sponge as I go. Continue to wipe the grout away and clean up the area until you are satisfied with the way the grout looks.
Allow the grout to set overnight in a cool dry place. Wipe area with a soft cloth to remove any loose grout when fully dry.
STEP FIVE:
Using a sponge brush, apply a coat of Mosaic Grout Sealer to your project.
This will help repel water if your project will be outside and extends the life of the grout. It doesn't make your project waterproof. Since I am using my mosaic as a birdbath I am going to add a layer of clear acrylic paint.
After your sealer has dried for 1-2 hours, your project is complete!
I will attach the base to the terra cotta pot with a healthy amount of gorilla glue and it will reside in my GGG Memorial Garden. I think I will also add a row of red tiles around the bottom for extra color!!
A few of my previous projects:
Stepping stone. This poor guy needs some fixing up! One of my first projects I did with my mom more than 10 years ago.
Erica & I did these sweet lady bugs. We used large landscaping rocks. We drew on the rocks with sharpies to define what area would be head/wings/eyes.
Bowling ball turned gazing ball in my butterfly garden.
This one is a little different, I used a form and Stepping Stone Mix to make my own stone. You can embellish and stamp before the stone dries.
Step stool for kids bathroom. This is my favorite project. I traced this octopus from the towel/shower curtain and then copied it onto the wooden step stool.
Mosaics are such a versatile, fun craft. I absolutely love doing them and I hope I have inspired at least one of you. Send me pictures if you venture into the world of mosaics!!
P.S.
Lacy, these are awesome! I did some mosaics at the Vanderbilt craft center when I was in grad school and I LOVED that craft. I never did anything that could go outdoors though- so this is a great "how- to" about doing one like that! You rock!
ReplyDeletevery nice mosaics! thank you for explaining all steps with photos
ReplyDeleteGreat tutorial! Thanks for sharing. I love your projects. :)
ReplyDeleteHi, just getting into mosaics, and your tutorial is brilliant. Thanks so much, I am inspired! :)
ReplyDeleteWhat kind of glue do u use??
ReplyDeleteGreat tortorial. Thank you. Beautiful work
ReplyDelete